A16 Silencer Supports
The STODDARD SILENCERS’ Silencer Supports can be used to support horizontally installed intake or discharge silencers. Designed primarily to be mounted upon STODDARD SILENCERS’ PD13 and PD33 Series Discharge Silencers, they may also be used with customer fabricated bases. The STODDARD SILENCERS’ Silencer Supports are designed to insure that when the silencer is properly supported, no excessive loads are applied to either the blower or silencer. The support tubes can be adjusted to the correct height. The tubes can then be welded together or a hole can be drilled through both tubes and they can be bolted together.
STODDARD SILENCERS’ Silencer Supports are made from standard wall tubing and rolled and welded sheet and plate steel. The Silencer Supports are designed to support STODDARD SILENCERS’ D13R and D33R Intake Silencers on the PD Series Discharge Silencer bases.